The highlight is 3 power amplifiers ... BMW 532D Part 1 [Installation / Review]

Sasaki's BMW523D aims to balance high sound quality and advanced installation design.The highlights of the trunk room are installed three power amplifiers, and the design is high.It was a finish that allows you to see the technical skills of Sound Freaks in Iwate Prefecture.

Adopts a style to install three Mosconi ZERO4 in the trunk room

Aiming for overwhelming sound quality, a system is incorporated, and in addition to the installation of elaborate ideas in every corner.In addition, Sasaki's BMW has been finished in a high -level sound with careful adjustment.Here, let's take a look at the exquisite installation made by pouring the power that Sound Freaks has.

When you open the trunk room, you will jump into your eyes.Layout that arranges three Mosconi ZERO4 vertically x sideways in the trunk room.This layout alone is a masterpiece only for power amplifiers with rich design.

He drives the front 3 -way + subwoofer strongly, is the center of the installation design, and is the basis of the sound.

It is also impressive that indirect lighting is built in the surrounding area and the top panel is beautifully illuminated.The style in which silver white power amplifiers emerge on the blue base panel are very high quality.

Fascinated by the high -quality installation design that emphasizes the beauty of the power amplifier

A trunk room floor with Mosconi ZERO4 installed.You can see that it is a design that makes you feel three -dimensional just by looking at it.The reason is that each of the three power amplifiers is built -in at an angle.One of the center is flat, but the two ZERO4 on both sides are built -in with an angle to lift at both ends.Instead of assembling a flat power amplifier, a moderate angle of each power amplifier gives a three -dimensional effect, and it also affects how to hit indirect lighting, and also helps add beautiful shadows.There is.It's a pretty elaborate installation, but if you look at the results, you'll see that the effect was outstanding.

If you look at the blue base panel around the power amplifier, the angle of the angle will be conveyed.A blue panel is spread out to outline each power amplifier, and three power amplifiers are installed so that it floats.The interior covered with an acrylic protective panel shows the degree of perfection like an art work.

It is wonderful to make a device, such as applying a diffusion processing in the enclosure using hiba material.

Another climax on the trunk room design is the enclosure of the subwoofer built on the front wall.By making the rear surface with acrylic and showing the inside of the enclosure, the internal processing of the elaborate enclosure is made from the trunk room side.

Multiple wooden columns are used in the enclosure, but you can see them.This is a part used as a reinforced material for subwoofer and enclosure, and uses hiba material.Hiba is a relatively soft wood, and one of the features is that resonance is difficult.Therefore, it is ideal for processing back pressure in the enclosure.Of course, it goes without saying that the design is very effective.

In addition, some marble panels are pasted on the wall surface in the enclosure.This is also aimed at the effect of increasing the strength of the wall surface.It is also an installation point unique to the owner that we are particular about the enclosure design to thoroughly improve the quality of the low frequency range.

In the next part of the next part, let's look at the high -end specification front stage with 3 -way venture audio.This is also worth noting because it boasts high design.

Yasuhiro Tsuchida | Writer After experiencing an engineer involved in digital audio, he changed jobs to a publisher editor.He worked in the editorial department of motorcycle magazines and 4WD magazines.After independence, he worked on car audio, car, wristwatches, mono, interior, outdoor, and other editor -in -chief of car audio magazines.He is currently active mainly for car audio and other writing.