How to enable the stereo mixer in Windows 10 if "stereo mixer" is not displayed

Use the "stereo mixer" when recording music and sounds played on PC speakers in Windows 10, but I will write down how to deal with it without showing it.

I think this is useful information when using Google documents to write from voice files for free.

To set the recording source as a stereo mixer, right-click the sound icon on the task tray Open sounds recording tab.

At this point, if the "stereo mixer" is not valid, right-click "enable" to see the stereo mixer in various software.

In addition, if you want to record music and sounds played by PC, right-click the stereo mixer set to specified device.

If the stereo mixer is not displayed in the sound window, right-click where there is nothing in the box, and then view everything in the display ~ device.

If it is not shown, the sound driver that may be used (at least in the initial state) does not support the stereo mixer.

Especially when using the Windows standard driver, the stereo mixer may not be supported, which is troublesome.

Under the circumstances,

I can think of it.

If you have more than one PC, other PC of different models / operating systems may use stereo mixers.

In addition, if you can change the system configuration yourself, you may use the stereo mixer by adding or changing the PC sound card.

In any case, as the ultimate means that cannot be used in any case, there is also such a method.

Right. A method of directly connecting a loudspeaker and a microphone.

The simulation path will be longer, so it may be subtle for recording purposes, but if the purpose is to type, the accuracy will not actually drop to that extent.

Note, however, that the adjustment of the input level is necessary, so the circuit that can make any volume adjustment must be clamped. If it is simply connected directly with a cable, the level is not appropriate, and the recognition accuracy will decrease.