The thin and completely wireless earphone "GRFD-SWE200M6" released by "GEO", which is familiar from rental videos. The attraction is that price, and the over-the-counter sales price is 2999 yen.
The price of 2999 yen is quite cheap for wireless earphones, but for those who have not used wireless earphones yet, its appeal may be difficult to understand.
So this time, if it is a 64GB model, the cost performance is good at Apple's official price of 50,000 yen or less, and the best-selling "iPhone SE (2nd generation)" and "GRFD-SWE200M6" in the current iPhone series are connected. I actually tried it.
If you are thinking about getting started with wireless earphones, or if you are interested in wireless earphones but don't have a chance to go to home electronics mass retailers, please refer to it.
Inner ear type that can be used with only one
First, check the appearance and included items of GRFD-SWE200M6.
This is a charging case. It measures 87.5 mm wide x 35 mm deep and is only 18.8 mm thick.
Therefore, even if you put it in your jeans pocket, it will be easy to carry because it has little bulge.
There is a Type-C port for charging on the bottom.
A charging case, earphone body, instruction manual, and Type-A / Type-C cable are included, so you can charge using this.
When you open the lid of the case, it is written as "R" and "L", so you can see the left and right of the earphone at a glance. The earphones are fixed to the charging case with a magnet and can be easily removed.
If you turn on Bluetooth on your smartphone or PC, you can easily connect by simply removing the earphones from the case. * The first connection method will be introduced later.
GRFD-SWE200M6 is an inner ear type. It may be recommended for those who are not good at wearing canal type earphones that firmly adhere to the ear holes.
In addition, it is a "left and right separated type" that can be used such as playing music with the left earphone while charging the right earphone and switching to the right earphone when the battery of the left earphone runs out.
Compatible with iPhone SE ◎ !? How comfortable is it?
We will connect GRFD-SWE200M6 to iPhone SE and introduce its fit and sound quality.
First, turn on Bluetooth on your iPhone SE.
Then remove both earphones from the charging case. Then, the lamp on the back side of either the left or right earphone blinks alternately with red and blue.
Then open the iPhone SE Bluetooth settings screen. "SWE200M6" should be displayed on the setting screen, so tap here. If you can connect safely, the lamp of the earphone will go out.
When the earphones are connected successfully, "Connected" is displayed in the "SWE200M6" column. In my case, I was able to connect in just 30 seconds.
Once you can connect to the iPhone SE, you can connect automatically from the second time onwards by simply removing the earphones from the charging case.
When I actually put it on, I didn't feel oppressive when I put it on because it was an inner ear type. However, if you are accustomed to canal type earphones, you may feel a little strange at first.
I usually use canal type earphones, so I thought, "If I shake my head a little, it will come off?"
It's quite lightweight, about 3.6g per ear, so you won't have to worry about your ears getting tired even if you use it for a long time.
The waterproof performance is IPX4, so even if you sweat a little while exercising, you will not have to worry about malfunction.
When I watched the latest action movies where fierce battle scenes are talked about on iPhone SE, I was able to hear the characters' lines even in the shooting battle scene without losing the sound of the gun bursting. ..
In addition, each of the left and right earphones is equipped with a 13mm dynamic driver, which gives a good impression of the bass, such as the rock bass and the orchestra's contrabass.
In addition, GRFD-SWE200M6 supports the Bluetooth standard (codec) called "AAC", so you can enjoy movies and music with better sound quality when connecting to Apple products such as iPhone SE that supports AAC.
It turned out that the earphones are generally compatible with the iPhone SE in terms of low price, ease of connection, codec, etc.
By the way, you can also operate by tapping the touch sensor of the earphone. You can play or pause music with just a tap, so you don't have to take out your iPhone SE every time.
The following is the operation method when tapping the touch sensor of the earphone. ◯ Answering / Ending a call: Tap either the left or right earphone twice. ◯ Reject incoming call: Press and hold either the left or right earphone for 2 seconds ◯ Play / Pause: Tap either the left or right earphone twice while playing music (video) ◯ Song forward: Tap the right earphone three times to advance the song I can. ◯ Rewinding music: You can rewind music by tapping the left earphone three times. ◯ Voice Assistant activation: Press and hold either the left or right earphone for 3 seconds to activate voice assistants such as siri and Google Assistant.
[Takamizawa's Judgment] Ease of use ★★★★ Design ★★★★ Function ★★★★ Sound quality ★★★★ Cospa ★★★★★ Comfortable ★★★★
It is quite lightweight, about 3.6g per ear, and the codec is AAC compatible. The maximum continuous time is about 4 hours, so even if you are playing music on your iPhone SE while commuting to work or school, you will not have to worry about the earphone battery running out by the time you get home.
GRFD-SWE200M6 with such high performance. It should have been understood that the price of 2999 yen is quite excellent in cost performance. The GRFD-SWE200M6 is a perfect product for those who are considering purchasing wireless earphones for the first time, or for the first wireless earphones to be given to children.
If you go to borrow a DVD or CD, or go to Geo to buy the latest game software, why don't you feel free to pick up the GRFD-SWE200M6? Please immerse yourself in the charm of wireless earphones!
GRFD-SWE200M6 specifications
Weight: Approximately 3.6g for one ear Maximum continuous playback time: Approximately 4 hours Codec: SBC / AAC compatible Waterproof performance: IPX4 Charging case size: Width 87.5mm x Depth 35mm x Thickness 18.8mm Price: 2999 yen
[Reference] GRFD-SWE200M6
Interview / text / Ko Takamizawa
